Publications

  1. Stavins, R.A., S. Kim, A. Meddling, V.S. Garimella, E. Koronio, T. Shockner, G. Ziskind, N. Miljkovic, and W.P. King, “Dynamic phase change materials with extended surfaces,” Applied Physics Letters 125, 064103, 2024
  2. Chen, S., Y. Zhang, W.P. King, R. Bashir, and A.M. van der Zande, “Edge-Passivated Monolayer WSe2 Nanoribbon Transistors,” Advanced Materials, 2313694, 2024.
  3. Bimrose, M.V., T. Hu, D.J. McGregor, J. Wang, S. Tawfick, C. Shao, Z. Liu, and W.P. King, “Detecting and Classifying Hidden Defects in Additively Manufactured Parts using Deep Learning and X-ray Computed Tomography,” Journal of Intelligent Manufacturing, 2024.
  4. Meia, R.S., C.H. Conway, M.V. Bimrose, W.P. King, C. Shao, “Deep Learning of 3D Point Clouds for Detecting Geometric Defects in Gears,” Manufacturing Letters, 2024.
  5. Bimrose, M.V., T. Hu, D.J. McGregor, J. Wang, S. Tawfick, C. Shao, Z. Liu, and W.P. King, “Automatic Detection of Hidden Defects and Qualification of Additively Manufactured Parts using X-Ray Computed Tomography and Computer Vision,” Manufacturing Letters, 2024.
  6. Mehta, M., M.V. Bimrose, D.J. McGregor, W.P. King, and C. Shao, “Federated learning enables privacy-preserving and data-efficient dimension prediction and part qualification across additive manufacturing factories,” Journal of Manufacturing Systems 74, 752-761, 2024.
  7. Garimella, V.S., W. Fu, R.A. Stavins, S. Kim, T. Shockner, E. Koronio, G. Ziskind, W.P. King, and N. Miljkovic, “Fundamental limits of dynamic phase change materials,” Applied Physics Letters 124, 123904, 2024.
  8. Lad, A.A., E. Roman, Y. Zhao, W.P. King, and N. Miljkovic, “Fin Design Topology Optimization for Direct Liquid Cooling of Multi-Chip Power Modules,” IEEE Transactions on Components, Packaging, and Manufacturing Technology 14, 795-809, 2024.
  9. Conway, C.H., D.J. McGregor, T. Antonsen, C. Wood, C. Shao, and W.P. King, “Geometry repeatability and prediction for personalized medical devices made using multi-jet fusion additive manufacturing,” Additive Manufacturing Letters 9, 100200, 2024.
  10. Lad, A.A., W.P. King, and N. Miljkovic, “Multi-Objective Reduced-Order Design Optimization of Single-Phase Liquid Coolers for Electronics,” Applied Thermal Engineering 240, 122127, 2024.
  11. McAfee, R.C., M.C. Fish, A.A. Wilson, H.H. Tsang, J.A. Boltersdorf, S. Kim, N. Miljkovic, and W.P. King, “Fabrication and Thermal Properties of a Gallium and Porous Foam Composite Phase Change Material,” ACS Applied Engineering Materials 1, 2847-2857, 2023.
  12. Kim, S., H. Kim, W.P. King, N. Miljkovic, “Gaussian Process Optimization of Phase Change Material Heat Sink Design,” Numerical Heat Transfer, Part B: Fundamentals, 2023.
  13. Tsai, S., Q Wang, Y Wang, W.P. King, and S. Tawfick, “Miniature Soft Jumping Robots Made by Additive Manufacturing,” Smart Materials and Structures 32, 10, 2023.
  14. Wu, Y., E. Rytkin, M. Bimrose, S. Li, Y.S. Choi, G. Lee, Y. Wang, L. Tang, M. Madrid, G. Wickerson, J.K. Chang, J. Gu, Y. Zhang, J. Liu, S. Tawfick, Y. Huang, W.P. King, I.R. Efimov, and J.A. Rogers, “A Sewing Approach to the Fabrication of Eco/bioresorbable Electronics,” Small, 2305017, 2023.
  15. Kim, H., S. Tawfick, and W.P. King, “Buckling elastomeric springs and lattices for tailored energy absorption,” Materials Today Communications 35, 106417, 2023.
  16. Kim, S., T. Yang, N. Miljkovic, and W.P. King, “Phase Change Material Integrated Cooling for Transient Thermal Management of Electronic Devices,” International Journal of Heat and Mass Transfer 213, 124263, 2023.
  17. Yoo, S., T. Yang, M. Park, H. Jeong, Y.J. Lee, D. Cho, J. Kim, S.S. Kwak, J. Shin, Y. Park, Y. Wang, N. Miljkovic, W.P. King, and J.A. Rogers , “Responsive materials and mechanisms as thermal safety systems for skin-interfaced electronic devices,” Nature Communications 14, 1024, 2023
  18. Stavins, R.A., and W.P. King, “Three-Dimensional Elastomer Bellows Microfluidic Pump,” Microfluidics and Nanofluidics 27, 13, 2023.
  19. Park., M., J.Y. Yoo, T. Yang, Y.H. Jung, A. Vázquez-Guardado, S. Li, J.H. Kim, J. Shin, W.Y. Maeng, G. Lee, S. Yoo H Luan, J.T. Kim, H.S. Shin, M.T. Flavin, H.J. Yoon, N. Miljkovic, Y. Huang, W.P. King, and J.A. Rogers, “Skin-integrated systems for power efficient, programmable thermal sensations across large body areas,” Proceedings of the National Academy of Sciences 120, e2217828120, 2023.
  20. Lad, A.A., M.J. Hoque, S. Christian, Y. Zhao, J.C. Balda, W.P. King, and N. Miljkovic, “High Power Density Thermal Management of Discrete Semiconductor Packages enabled by Additively Manufactured Hybrid Polymer-Metal Coolers,” Applied Thermal Engineering 220, 2023.
  21. Lad, A.A., A. Tayade, M.J. Hoque, Y. Zhao, J.C. Balda, W.P. King, and N. Miljkovic, “Conventional and Topologically Optimized Polymer Manifolds for Direct Cooling of Power Electronics,” International Journal of Heat and Mass Transfer 201, 123611, 2023.
  22. Kim, H., S. Tawfick, and W.P. King, “Modeling and design of zero-stiffness elastomer springs using machine learning,” Advanced Intelligent Systems, 2200225, 2022.
  23. Jankelow, A.M., H. Lee, W. Wang, T.H. Hoang, A. Bacon, F. Sun, S. Chae, V. Kindratenko, K. Koprowski, R.A. Stavins, D. Ceriani, Z. Engelder, W.P. King, M.N. Do, R. Bashir, E. Valera, and B.T. Cunningham, “Smartphone Clip-On Instrument and Microfluidic Processor for Rapid Sample-to-Answer Detection of Zika Virus in Whole Blood Using Spatial RT-LAMP,” Analyst 147, 3838-3853, 2022.
  24. Yang, T., F. Diao, A. Mantooth, Y. Zhao, W.P. King, and N. Miljkovic, “Heat Spreader Thermal Switch for Power Converter Isothermalization,” IEEE Transactions on Components, Technology, and Packaging 12, 7, 2022.
  25. McGregor, D.J., M.V. Bimrose, C. Shao, S. Tawfick, and W.P. King, “Using machine learning to predict dimensions and qualify diverse part designs across multiple additive machines and materials,” Additive Manufacturing 55, 102848, 2022.
  26. Ho, J.Y., K.F. Rabbi, S. Khodakarami, S. Setta, T.N. Wong, K.C. Leong, W.P. King, and N. Miljkovic, “Surface Structuring of Metal Additively Manufactured Materials for Enhanced Vapor-Liquid Phase Transitions,” Advanced Science, 2104454, 2022.
  27. McGregor, D.J., M.V. Bimrose, S. Tawfick, and W.P. King, “Large batch metrology on internal features of additively manufactured parts using X-ray computed tomography,” Journal of Materials Processing Technology 306, 117605, 2022.
  28. Lim, J., R. Stavins, V. Kindratenko, J. Baek, L. Wang, K. White, J. Kumar, E. Valera, W.P. King, and R. Bashir, “Microfluidic Point-Of-Care Device for Detection of Early Strains and B.1.1.7 Variant of SARS-CoV-2 Virus,” Lab on Chip 22, 7, 1297-1308, 2022.
  29. Fu, W., X. Yan, Y. Gurumukhi, V.S. Garimella, W.P. King, and N. Miljkovic, “Ultrahigh power and energy density dynamic phase change materials using pressure-enhanced close contact melting,” Nature Energy 7, 270-280, 2022.
  30. Yang, Y., D.J. McGregor, S. Tawfick, W.P. King, and C. Shao, “Hierarchical data models improve the accuracy of feature level predictions for additively manufactured parts,” Additive Manufacturing 51, 102621, 2022.
  31. Li, N., B. Zhao, R. Stavins, A.S. Peinetti, N. Chauhan, R. Bashir, B.T. Cunningham, W.P. King, Y. Lu, X. Wang, E. Valera, “Overcoming the Limitations of COVID-19 Diagnostics with Nanostructures, Nucleic Acid Engineering, and Additive Manufacturing,” Current Opinion in Solid State & Materials Science 26, 100966, 2022.
  32. Moon, H., D.J. McGregor, N. Miljkovic, and W.P. King, “Ultra-power-dense heat exchanger development through genetic algorithm design and additive manufacturing,” Joule 5, 3045-3056, 2021.
  33. Lad, A.A., K.A. James, W.P. King, and N. Miljkovic, “Reduced Order Design Optimization of Liquid Cooled Heat Sinks,” Journal of Electronic Packaging 143, 041105, 2021.
  34. Yang, T., W.P. King, and N. Miljkovic, “Phase change material based thermal energy storage,” Cell Reports Physical Science 2, 100540, 2021.
  35. Berger, J., M. Aydin, R. Stavins, J. Heredia, A. Mostafa, A. Ganguli, E. Valera, R. Bashir, and W.P. King, “Portable pathogen diagnostics using microfluidic cartridges made from continuous liquid interface production additive manufacturing,” Analytical Chemistry 93, 10048-10055, 2021.
  36. Moon, H., K. Boyina, N. Miljkovic, and W.P. King, “Heat Transfer Enhancement of Single-Phase Internal Flows using Shape Optimization and Additively Manufactured Flow Structures,” International Journal of Heat and Mass Transfer 177, 121510, 2021.
  37. Chen, S. and W.P. King, “Nanometer-Scale Capillary-Driven Flow and Molecular Weight Govern Polymer Nanostructure Deposition from a Heated Tip,” Journal of Vacuum Science and Technology B 29, 032601, 2021.
  38. Yi, X., T. Yang, J. Xiao, N. Miljkovic, W.P. King, K.S. Haran, “Equivalent Thermal Conductivity Prediction of Form-Wound Windings with Litz Wire Including Transposition Effects,” IEEE Transactions on Industry Applications 57, 2, 1440-1449, 2021.
  39. McGregor, D.J., S.Rylowicz, A. Brenzel, D. Baker, C. Wood, D. Pick, H. Deutchman, C. Shao, S. Tawfick, and W.P. King, “Analyzing part accuracy and sources of variability for additively manufactured lattice parts made on multiple printers,” Additive Manufacturing 40, 101924, 2021.
  40. Chen, S., J. Son, S. Huang, K. Watanabe, T. Taniguchi, R. Bashir, A.M. van der Zande, and W.P. King, “Tip-Based Cleaning and Smoothing Improves Performance in Monolayer MoS2 Devices,” ACS Omega 6, 4013–4021, 2021.
  41. Yang, T., P.V. Braun, N. Miljkovic, and W.P. King, “Phase Change Material Heat Sink for Transient Cooling of High-Power Devices,” International Journal of Heat and Mass Transfer 170, 121033, 2021.
  42. King, W.P., J. Amos, M. Azer, D. Baker, R. Bashir, C. Best, E. Bethke, S.A. Boppart, E. Bralts, R.M. Corey, R. Dietkus, G. Durack, S. Elbel, G. Elliott, J. Fava, N. Goldenfeld, M.H. Goldstein, C. Hayes, N. Herndon, S. Jamison, B. Johnson, H. Johnson, M. Johnson, J. Kolaczynski, T. Lee, S. Maslov, D.J. McGregor, D. Milner, R. Moller, J. Mosley, A. Musser, M. Newberger, D. Null, L. O’Bryan, M. Oelze, J. O’Leary, A. Pagano, M. Philpott, B. Pianfetti, A. Pille, L. Pizzuto, B. Ricconi, M. Rubessa, S. Rylowicz, C. Shipley, A.C. Singer, B. Stewart, R. Switzky, S. Tawfick, M. Wheeler, K. White, E.M. Widloski, E. Wood, C. Wood, A.R. Wooldridge, “Emergency Ventilator for COVID-19,” PLOS One 15, 12, e0244963, 2020.
  43. Ganguli, A., A. Mostafa, J. Berger, M. Aydin, F. Sun, S.A.S. de Ramirez, E.Valera, B.T. Cunningham, W.P. King, and R. Bashir, “Rapid Isothermal Amplification and Portable Detection System for SARS-CoV-2,” Proceedings of the National Academy of Sciences 117, 22727–22735, 2020.
  44. Riedo, E., X. Zheng, A. Calo, T. Cao, X. Liu, Z. Huang, P.M. Das, M. Drndic, C. Aruta, E. Albisetti, F. Lavini, T.D. Li, V. Narang, W. King, J. Harrold, M. Vittadello, and D. Shahrjerdi, “Spatial Defects Nanoengineering for Bipolar Conductivity in MoS2,” Nature Communications 11, 3463, 2020.
  45. Moon, H.K., N. Miljkovic, and W.P. King, “High Power Density Thermal Energy Storage using Additively Manufactured Heat Exchangers and Phase Change Material,” International Journal of Heat and Mass Transfer 153, 119591, 2020.
  46. Yang, T., J.G. Kang, P.B. Weisensee, B. Kwon, P.V. Braun, N. Miljkovic, and W.P. King, “A Composite Phase Change Material Thermal Buffer Based on Porous Metal Foam and Low-Melting-Temperature Metal Alloy,” Applied Physics Letters 116, 071901, 2020.
  47. Kwon, B., T. Foulkes, T. Yang, N. Miljkovic, and W.P. King, “Air Jet Impingement Cooling of Electronic Devices Using Additively Manufactured Nozzles,” IEEE Transactions on Components and Packaging Technology 10, 220-229, 2020.
  48. Son, J., N. Buzov, S. Chen, D. Sung, H. Ryu, J. Kwon, S. Kim, J. Xu, S. Hong, W.P. King, G.H. Lee, and A.M. van der Zande, “Tailoring surface properties via functionalized hydrofluorinated graphene compounds,” Advanced Materials 31, 1903424, 2019.
  49. Yang, T., T. Foulkes, B. Kwon, J.G. Kang, P.V. Braun, W.P. King, and N. Miljkovic, “An Integrated Liquid Metal Thermal Switch for Active Thermal Management of Electronics,” IEEE Transactions on Components and Packaging Technology 9, 2341-2351,2019.
  50. McGregor, D.J., S. Tawfick, and W.P. King, “Automated Metrology and Geometric Analysis of Additively Manufactured Lattice Structures,” Additive Manufacturing 28, 535-545, 2019
  51. Kwon, B., L. Liebenberg, A. M. Jacobi, and W. P. King. “Heat transfer enhancement of internal laminar flows using additively manufactured static mixers,” International Journal of Heat and Mass Transfer 137, 292-300, 2019.
  52. Estrada, D., Z. Li, G. Choi, S.N. Dunham, A.Serov, J.Lee, Y.Meng, F.Lian, N.C. Wang, A.Perez, R.T. Haasch, J. Zuo, W.P. King, J.A. Rogers, D.G. Cahill & E. Pop. “Thermal transport in layer-by-layer assembled polycrystalline graphene films,” npj 2D Materials and Applications 3, 1, 2019.
  53. Chen, S., S. Kim, W. Chen, J. Yuan, R. Bashir, J. Lou, A.M. van der Zande, and W.P. King. “Monolayer MoS2 Nanoribbon Transistors Fabricated by Scanning Probe Lithography,” Nano letters 19, 3, 2019.
  54. Pikul, J.H., S. Özerinç, B. Liu, R. Zhang, P.V. Braun, V.S. Deshpande & W.P. King, “High strength metallic wood from nanostructured nickel inverse opal materials,” Scientific Reports 9, 719, 2019.
  55. McGregor, M.J., S. Tawfick, and W.P. King, “Mechanical Properties of Hexagonal Lattice Structures Fabricated Using Continuous Liquid Interface Production Additive Manufacturing,” Additive Manufacturing 25, 10-18, 2019.
  56. Kwon, B., N. Maniscalco, A.M. Jacobi, and W.P. King, “High Power Density Two-Phase Cooling in Microchannel Heat Exchangers,” Applied Thermal Engineering 148, 1271-1277, 2019.
  57. Dong, L., W.P. King, M. Raleigh, and H.N.G. Wadley, “A microfabrication approach for making metallic mechanical metamaterials,” Materials and Design 160, 147-168, 2018.
  58. Yang, T., B. Kwon, P.B. Weisensee, J.G. Kang, X. Li, P. Braun, N. Miljkovic, and W.P. King, “Millimeter-Scale Liquid Metal Droplet Thermal Switch,” Applied Physics Letters 112, 063505, 2018.
  59. Kim, F., B. Kwon, Y. Eom, J.E. Lee, S. Park, S. Jo, S.H. Park, B.S. Kim, H.J. Im, M.H. Lee, T.S. Min, K.T. Kim, H.G. Chae, W.P. King, and J.S. Son, “3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks,” Nature Energy 4, 301-309, 2018.
  60. Weisensee, P.B., J. Ma, W.P. King, and N. Miljovkic, “Controlling the Contact Times of Bouncing Droplets: Droplet Impact on Vibrating Surfaces,” ASME Journal of Heat Transfer 140, 030901, 2018.
  61. Kwon, B., N.I. Maniscalco, A.M. Jacobi, and W.P. King, “High Power Density Air-Cooled Microchannel Heat Exchanger,” International Journal of Heat and Mass Transfer 118, 1276-1283, 2018.
  62. Pikul, J.H., P.V. Braun, and W.P. King, “Performance modeling and design of ultra-high power microbatteries,” Journal of the Electrochemical Society 164, E3122-E3131, 2017.
  63. Weisensee, P.B., J. Ma, Y.H. Shin, J. Tian, Y. Chang, W.P. King, and N. Miljkovic, “Droplet Impact on Vibrating Superhydrophobic Surfaces,” Physical Review Fluids 2, 103601, 2017.
  64. Rosenberger, M.R., M.C. Wang, X. Xie, J.A. Rogers, S.W. Nam, and W.P. King, “Measuring Individual Carbon Nanotubes and Single Graphene Sheets using Atomic Force Microscope Infrared Spectroscopy,” Nanotechnology 28, 355707, 2017.
  65. Pandya, S., .D. Wilbur, B. Bhatia, A.R. Damodaran, C. Monachon, A. Dasgupta, W.P. King, C. Dames, and L.W. Martin, “Direct Measurement of Pyroelectric and Electrocaloric Effects in Thin Films,” Physical Review Applied 7, 034025, 2017.
  66. Weisensee, P.B., Y. Wang, Q. Hongliang, D. Schultz, W.P. King, and N. Miljkovic, “Condensate Droplet Size Distribution on Lubricant-Infused Surfaces,” International Journal of Heat and Mass Transfer 109, 187–199, 2017.
  67. Corbin, E.A., O.O. Adeniba, O.V. Cangellaris, W.P. King, and R. Bashir, “Evidence of differential mass change rates between human breast cancer cell lines in culture,” Biomedical Microdevices 19, 10, 2017.
  68. Weisensee, P.B., J. Tian, N. Miljkovic, and W.P. King, “Springboard Droplet Bouncing on Flexible Superhydrophobic Substrates,” ASME Journal of Heat Transfer 139, 020902, 2017.
  69. Rosenberger, M.R., S. Chen, C.B. Prater, and W.P. King, “Micromechanical Contact Stiffness Devices and Application for Calibrating Contact Resonance Atomic Force Microscopy,” Nanotechnology 28, 044003, 2016.
  70. Ozerinc, S., R.S. Averback, and W.P. King, “In situ Measurements of Irradiation-Induced Creep of Nanocrystalline Copper at Elevated Temperatures,” JOM Journal of the Minerals, Metals and Materials Society 68, 2737-2741, 2016.
  71. Bhatia, B., H. Cho, J. Karthik, J. Choi, D.G. Cahill, L.W. Martin, and W.P. King, “High Power Density Pyroelectric Energy Conversion in Nanometer-Thick BaTiO3 Films,” Nanoscale and Microscale Thermophysical Engineering 20, 137-146, 2016.
  72. Weisensee, P.B., J. Tian, N. Miljkovic, and W.P. King, “Water droplet impact on elastic superhydrophobic surfaces,” Nature Scientific Reports 6, 30328, 2016.
  73. Rosenberger, M.R., J.P. Jones, E.R. Heller, S. Graham, and W.P. King, “Nanometer-Scale Strain Measurements in AlGan/GaN High-Electroni Mobility Transistors during Pulsed Operation,” IEEE Transactions on Electron Devices 63, 2742-2748, 2016.
  74. Albisetti, E., D. Petti, M. Pancaldi, M. Madami, S. Tacchi, J. Curtis, W.P. King, A. Papp, G.G. Csaba, W. Porod, P. Vavassori, E. Riedo, and R. Bertacco, “Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography,” Nature Nanotechnology 11, 545–551, 2016. Cover article.
  75. Pikul, J.H., J. Liub, P.V. Braun, and W.P. King, “Integration of High Capacity Materials into Interdigitated Mesostructured Electrodes for High Energy and High Power Density Primary Microbatteries,” Journal of Power Sources 315, 308-315, 2016.
  76. Choi, J., H.J. Kim, M.C. Wang, J. Leem, W.P. King, and S. Nam, “Three-dimensional Integration of Graphene via Swelling, Shrinking and Adaptation,” Nano Letters 15, 4525-4531, 2015.
  77. Hu, H., S. Banerjee, D. Estrada, R. Bashir, and W.P. King, “Tip-Based Nanofabrication of Arbitrary Shapes of Graphene Nanoribbons for Device Applications,” RSC Advances 5, 37006-37012, 2015.
  78. Ninga, H., J.H. Pikul, R. Zhanga, X. Lia, S. Xua, J. Wang, J.A. Rogers, William P. King, and Paul V. Braun, “Holographic Patterning of High Performance on-chip 3D Lithium ion Microbatteries,” Proceedings of the National Academy of Sciences 21, 6573-6578, 2015.
  79. Kim, H.J., J. Choi, S. Nam, and W.P. King, “Batch Fabrication of Transfer-Free Graphene-Coated Microcantilevers,” IEEE Sensors Letters, 25, 065003, 2015.
  80. Neelakantan, N.K., P.B. Weisensee, J.W. Overcash, E.J. Torrealba, W.P. King, and K.S. Suslick, “Spray-On Omniphobic ZnO Coatings,” RSC Advances 5, 69243, 2015.
  81. Shi, L., C. Dames, J.R. Lukes, P.S. Reddy, J. Dudae, D.G. Cahill, J. Lee, A. Marconnet, K.E. Goodson, J.H. Bahk, A. Shakouri, R.S. Prasher, J.R. Felts, W.P. King, B. Hahn, and J.C. Bishof, “Evaluating Broader Impacts of Nanoscale Thermal Transport Research,” Nanoscale and Microscale Thermophysical Engineering 19, 127-165, 2015.
  82. Weisensee, P.B., N.K. Neelakantan, K.S. Suslick, A.M. Jacobi, and W.P. King, “Impact of Air and Water Vapor Environments on the Hydrophobicity of Surfaces,” Journal of Colloid and Interface Science 453, 177–185, 2015.
  83. Kim, H.J. and W.P. King, “A Study of Long Term Operation and Reliability of Heated Atomic Force Microscope Cantilevers,” Journal of Micromechanics and Microengineering 25, 065003, 2015.
  84. Johnston, M., W.P. King, and R.H. Ewoldt, “Shear stress characteristics of microtextured surfaces in gap-controlled hydrodynamic lubrication,” Tribology International 82, 123-132, 2015.
  85. Ozerinc, S., H.J. Kim, R.S. Averback, and W.P. King, “Direct Measurements of Irradiation-Induced Creep in Micropillars of Amorphous Cu56Ti38Ag6, Zr52Ni48, Si and SiO2,” Journal of Applied Physics 117, 024310, 2015.
  86. Corbin, E.A, F. Kong, C.T. Lim, W.P. King, and R. Bashir, “Biophysical Properties of Human Breast Cancer Cells Measured Using Silicon MEMS Resonators and Atomic Force Microscopy,” Lab on a Chip 15, 839-847, 2015.
  87. Du, F., J.R. Felts, X. Xie, J. Song, Y. Li, M.R. Rosenberger, A.E. Islam, S.H. Jin, S.N. Dunham, C. Zhang, W.L. Wilson, Y. Huang, W.P. King, and J.A. Rogers, “Laser-Induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes,” ACS Nano 8, 12641-12649, 2014.
  88. Liu, J., H.G. Zhang, J.J. Wang, J. Cho, J.H. Pikul, E.S. Epstein, X.J. Huang, J.H. Liu, W.P. King, and P.V. Braun, “Hydrothermal Fabrication of Three-Dimensional Secondary Battery Anodes,” Advanced Materials 26, 7096, 2014.
  89. Bhatia, B., A.R. Damodaran, H. Cho, L.W. Martin, and W.P. King, “High-Frequency Thermal-Electrical Cycles for Pyroelectric Energy Conversion,” Journal of Applied Physics 19, 1945-9, 2014.
  90. Hu, H., H. Cho, S. Somnath, A. Vakakis, and W.P. King, “Silicon Nano-Mechanical Resonators Fabricated using Tip-Based Nanofabrication,” Nanotechnology 25, 275301 2014.
  91. Jeong, B., H. Cho, H. Keum, S. Kim, D. McFarland, L. Bergman, W.P. King, and A. Vakakis, “Complex Nonlinear Dynamics in the Limit of Weak Coupling of a System of Microcantilevers Connected by a Geometrically Nonlinear Tunable Nanomembrane,” Nanotechnology 25, 465501, 2014.
  92. Carroll, K.M., M. Desai, A.J. Giordano, J. Scrimgeour, W.P. King, E. Riedo, and J.E. Curtis, “Speed Dependence of Thermochemical Nanolithography for Gray-Scale Patterning,” Chemphyschem 15, 2530-2535, 2014.
  93. Hu, H., Y. Zhuo, M.E. Oruc, B.T. Cunningham, and W.P. King, “Nanofluidic Channels of Arbitrary Shapes Fabricated by Tip-Based Nanofabrication,” Nanotechnology 25, 455301, 2014.
  94. Grosse, K.L., V.E. Dorgan, D. Estrada, J.D. Wood, I. Vlassiouk, G. Eres, J.W. Lyding, W.P. King, and E. Pop, “Direct Observation of Resistive Heating at Graphene Wrinkles and Grain Boundaries,” Applied Physics Letters 105, 143109 2014.
  95. Mao, S., S. Ozerinc, W.P. King, R.S. Averback, and S.J. Dillon, “Effect of Irradiation Damage on the Shear Strength of Cu-Nb Interfaces,” Scripta Materiala 90, 29–32, 2014.
  96. Corbin, E., L. Millet, K. Keller, W.P. King, and R. Bashir, “Measuring Physical Properties of Neuronal and Glial Cells with Resonant Microsensors,” Analytical Chemistry 86, 4864–4872, 2014.
  97. Grosse, K.L., E. Pop, and W.P. King, “Heterogeneous Nanometer-Scale Joule and Peltier Effects in sub-25 nm Thin Phase Change Memory Devices,” Journal of Applied Physics 116, 124508, 2014.
  98. Grosse, K.L., E. Pop, and W.P. King, “Nanometer-Scale Temperature Imaging for Independent Observation of Joule and Peltier Effects in Phase Change Memory Devices,” Review of Scientific Instruments 85, 094904 2014.
  99. Somnath, S., J. Liu, M. Bakir, C.B. Prater, and W.P. King, “Multifunctional Atomic Force Microscope Cantilevers with Lorentz Force Actuation and Self-Heating Capability,” Nanotechnology 25, 395501, 2014.
  100. Pikul, J.H., Z.T. Dai, X. Yu, H. Zhang, T. Kim, P.V. Braun, and W.P. King, “Micromechanical Devices with Controllable Stiffness Fabricated from Regular 3D Porous Materials,” Journal of Micromechanics and Microengineering 24, 105006, 2014.
  101. Weisensee, P., E. Torrealba, M. Raleigh, A. Jacobi, and W.P. King, “Hydrophobic and oleophobic re-entrant steel microstructures fabricated using micro electrical discharge machining,” Journal of Micromechanics and Microengineering 24, 095020, 2014.
  102. Somnath, S. and W. P. King, “An Investigation of Heat Transfer between a Microcantilever and a Substrate for Improved Thermal Nanoimaging,” Nanotechnology 25, 365501, 2014.
  103. Park, J.Y., A. Gardner, W.P. King, and D.G. Cahill, “Droplet Impingement and Vapor Layer Formation on Hot Hydrophobic Surfaces,” ASME Journal of Heat Transfer 136, 092902, 2014.
  104. Cahill, D.G., P.V. Braun, G. Chen, D.R. Clarke, S. Fan, K.E. Goodson, P. Keblinski, W.P. King, G.D. Mahan, A. Majumdar, H.J. Maris, S.R. Phillpot, E.Pop, and L. Shi, “Nanoscale Thermal Transport II, 2003-2012,” Applied Physics Reviews 1, 011305, 2014.
  105. Seong, M., S. Somnath, H.J. Kim, and W.P. King, “Parallel Nanoimaging using an Array of 30 Heated Microcantilevers,” RSC Advances 4, 24747, 2014.
  106. Ozerinc, S., R.S. Averback, and W.P. King, “In situ creep measurements on micropillar samples during heavy ion irradiation,” Journal of Nuclear Materials 451, 104-110, 2014.
  107. Corbin, E.A., B.R. Dorvel, L.J. Millet, W.P. King, and R. Bashir, “Micro-patterning of Mammalian Cells on Suspended MEMS Resonant Sensors for Long-Term Growth Measurements,” Lab on a Chip 14, 1401-1404, 2014.
  108. Zhuo, Y., H. Hu, W. Chen, M. Lu, H. Yu, K.D. Long, E. Chow, W.P. King, and B.T. Cunningham, “Single Nanoparticle Detection Using Photonic Crystal Enhanced Microscopy,” Analyst 139, 1007-1015, 2014.
  109. Felts, J.R., M.S. Onses, J.A. Rogers, and W.P. King, “Nanometer Scale Alignment of Block-Copolymer Domains by means of a Scanning Probe Tip,” Advanced Materials 26, 2999-3002, 2014.
  110. Carroll, K., X. Lua, S. Kima, Y. Gao, H.J. Kim, S. Somnath, L. Polloni, R. Sordan, W.P. King, J.E. Curtis, and E. Riedo, “Parallelization of Thermochemical Nanolithography,” Nanoscale 6, 1299, 2014.
  111. Somnath, S., H.K. Kim, H. Hu, and W.P. King, “Parallel Nanoimaging and Nanolithography using a Heated Microcantilever Array,” Nanotechnology 25, 014001, 2014. Invited article for special issue celebrating the 25th anniversary of the journal Nanotechnology.
  112. Ricea, R.H., E. Gnecco, W.P. King, R. Szoszkiewicz, “Heterogeneity of spiral wear patterns produced by local heating on amorphous polymers,” Materials Chemistry and Physics, 141, 477-481 2013.
  113. Lee, Y.K., M. Haydell, J.T. Robinson, A. Laracuente, E. Cimpoiasu, W.P. King, and P.E. Sheehan, “Nanoscale Reduction of Graphene Fluoride via Thermochemical Nanolithography,” ACS Nano 7, 6219-6224, 2013.
  114. Hu, H., P.K. Mohseni, L. Pan, X. Li, S. Somnath, J. Felts, M.A. Shannon, and W.P. King, “Fabrication of Arbitrarily-Shaped Silicon and Silicon Oxide Nanostructures Using Tip-based Nanofabrication,” Journal of Vacuum Science and Technology B 31, 06FJ01, 2013.
  115. Kwon, B., M. Seong, J.N. Liu, M.R. Rosenberger, M.V. Schulmerich, R. Bhargava, B.T. Cunningham, and W.P. King, “Large Infrared Absorptance of Bimaterial Microcantilevers based on Silicon High Contrast Grating,” Journal of Applied Physics 114, 153511, 2013.
  116. Cho, H., J.R. Felts, M.F. Yu, L.A. Bergman, A.F. Vakakis, and W.P. King, “Improved Atomic Force Microscope Infrared Spectroscopy for Rapid Nanometer-Scale Chemical Identification,” Nanotechnology 24, 444007, 2013. Invited article for special issue on “Sensing at the Nanoscale.”
  117. (W) Song, J., C. Lu, X. Xie, Y. Li, Y. Zhang, K. L. Grosse, S. Dunham, Y. Huang, W. P. King, and J. A. Rogers, “Thermo-mechanical Modeling of Scanning Joule Expansion Microscopy Imaging of Single-Walled Carbon Nanotube Devices,” ASME Journal of Applied Mechanics 80, 040907, 2013.
  118. Liu, J., S. Somnath, and W.P. King, “Heated Atomic Force Microscope Cantilever with High Resistivity for Improved Temperature Sensitivity,” Sensors and Actuators 201, 141-147, 2013.
  119. Carroll, K.M., A.J. Giordano, D. Wang, V.K. Kodali, J. Scrimgeour, W.P. King, S.R. Marder, E. Riedo, and J.E. Curtis, “Fabricating Nanoscale Gradients with Thermochemical Nanolithography,” Langmuir 29, 8675−8682, 2013.
  120. Jin, S.H., S.N. Dunham, J. Song, X. Xie, J. Kim, C. Lu, A. Islam, F. Du, J. Kim, J.R. Felts, Y. Li, F. Xiong, A. Wahab, M. Menon, E. Cho, K.L. Grosse, D.J. Lee, H.U. Chung, E. Pop, M.A. Alam, W.P. King, Y. Huang, and J.A. Rogers, “Using Nanoscale Thermocapillary Flows to Create Purely Semiconducting Arrays of Single Walled Carbon Nanotubes,” Nature Nanotechnology 8, 347-355, 2013.
  121. You, X., J.H. Pikul, W.P. King, and J.J. Pak, “Zinc oxide inverse opal enzymatic biosensor,” Applied Physics Letters 102, 253103, 2013.
  122. Kwon, B., J. Jiang, M.V. Schulmerich, Z. Xub, R. Bhargava, G.L. Liu, and W.P. King, “Bimaterial microcantilevers with black silicon nanocone arrays,” Sensors and Actuators A 199, 143-148.
  123. Fletcher, P.C., V.K.R. Mangalam, L.W. Martin, and W.P. King, “Pyroelectric Electron Emission from Nanometer-Thick Films of PbZrxTi1-xO3,” Applied Physics Letters 102, 192908, 2013.
  124. Grosse, K.L., F. Xiong, S. Hong, W.P. King, and E. Pop, “Direct observation of nanometer-scale Joule and Peltier effects in phase change memory devices,” Applied Physics Letters 102, 193503, 2013.
  125. Felts, J.R, S. Law, C.M. Roberts, V. Podolskiy, D.M. Wasserman, and W.P. King, “Near-field Infrared Absorption of Plasmonic Semiconductor Microparticles Studied using Atomic Force Microscope Infrared Spectroscopy,” Applied Physics Letters 102, 152110, 2013.
  126. King, W.P., B. Bhatia, J.R. Felts, H.J. Kim, B. Kwon, B. Lee, S. Somnath, and M. Rosenberger, “Heated Atomic Force Microscope Cantilevers and their Applications,” Annual Review of Heat Transfer Vol. 12, 287-326, 2013.
  127. Kwon, B., M.V. Schulmerich, R. Bhargava, and W.P. King, “Infrared Emission from Heated Microcantilevers,” Nanoscale and Microscale Thermophysical Engineering 17, 141–153, 2013. Cover article.
  128. Pikul, J.H., H.G. Zhang, J. Cho, P.V. Braun, and W.P. King, “High Power Lithium Ion Micro Batteries from Interdigitated Three-Dimensional Bicontinuous Nanoporous Electrodes,” Nature Communications 4, 1732, 2013.
  129. Kim, J., S. Han, T. Walsh, K. Park, B.J. Lee, W.P. King, and J. Lee, “Temperature Measurements of Heated Microcantilevers using Scanning Thermoreflectance Microscopy,” Review of Scientific Instruments 84, 034903, 2013.
  130. Lee, B., S. Somnath, and W. P. King, “Fast Nanotopography Imaging Using a High Speed Cantilever with Integrated Heater-Thermometer,” Nanotechnology 24, 135501, 2013.
  131. Corbin, E.A., L.J. Millet, J.H. Pikul, C.L. Johnson, J.G. Georgiadis, W.P. King, and R. Bashir, “Micromechanical Properties of Hydrogels Measured with MEMS Resonant Sensors,” Biomedical Microdevices 15, 311–319, 2013.
  132. Felts, J.R., H. Cho, M.F. Yu, L. Bergman, A. Vakakis, and W.P. King, “Atomic Force Microscope Infrared Spectroscopy on 15 Nanometer Scale Polymer Nanostructures,” Review of Scientific Instruments 84, 023709, 2013.
  133. Fletcher, P.C., V.R. Mangalam, L.W. Martin, and W.P. King, “Field Emission from Nanometer-Scale Tips of Crystalline PbZrxTi1-xO3,” Journal of Vacuum Science and Technology A 31, 021805, 2013.
  134. Somnath, S., and W.P. King, “Heated Atomic Force Cantilever Closed Loop Temperature Control and Application to High Speed Nanotopography Imaging,” Sensors and Actuators A 192, 27-33. 2013.
  135. Kim, H.J., Z. Dai, and W.P. King, “Thermal Crosstalk in Heated Microcantilever Arrays,” Journal of Micromechanics and Microengineering 23, 025001, 2013.
  136. Ramesh, A., W. Akram, S.P. Mishra, A.H. Cannon, A.A. Polycarpou, and W.P. King, “Friction Characteristics of Microtextured Surfaces under Hydrodynamic Lubrication,” Tribology International 57, 170–176, 2013.
  137. Xie, X., K.L. Grosse, J. Song, C. Lu, S. Dunham, F. Du, A.E. Islam, Y. Li, Y. Zhang, E. Pop, Y. Huang, W.P. King, and J.A. Rogers, “Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy,” ACS Nano 6, 10267–10275, 2012.
  138. Kim, H.J., N. Moldovan, J.R. Felts, S. Somnath, Z. Dai, T.D.B. Jacobs, R.W. Carpick, J.A. Carlisle, and W.P. King, “Ultrananocrystalline Diamond Tip Integrated Onto a Heated Atomic Force Microscope Cantilever,” Nanotechnology 23, 495302, 2012.
  139. Bhatia, B., J. Karthik, T. Trong, D.G. Cahill, L.W. Martin, and W.P. King, “Pyroelectric Current Measurements on PbZr0.2Ti0.8O3 Epitaxial Layers,” Journal of Applied Physics 112, 104106, 2012.
  140. Felts, J.R., K. Kjoller, M. Lo, C.B. Prater, and W.P. King, “Nanometer Scale Infrared Spectroscopy of Heterogeneous Polymer Nanostructures Fabricated by Tip-Based Nanofabrication,” ACS Nano 6, 8015-8021, 2012.
  141. Rosenberger, M.R., B. Kwon, D.G. Cahill, and W.P. King, “Impact of Silicon Nitride Thickness on the Infrared Sensitivity of Silicon Nitride-Aluminum Microcantilevers,” Sensors and Actuators A 185, 17-23.
  142. Rice, R., P. Mokarian-Tabari, W.P. King, and R. Szoszkiewicz, “Local Thermo-Mechanical Analysis of a Microphase Separated Thin Lamellar PS-b-PEO Film,” Langmuir 28, 13503-13511.
  143. Millet, L.J., E.A. Corbin, R. Free, K. Park, H.J. Kong, W.P. King, and R. Bashir, “The Characterization of Mass and Swelling of Hydrogel Microstructures using MEMS Resonant Mass Sensor Arrays,” Small 8, 2555–2562, 2012. Cover article.
  144. Ozerinc, S., K. Tai, N.Q. Vo, P. Bellon, R.S. Averback, and W.P. King, “Grain Boundary Doping Strengthens Nanocrystalline Copper Alloys,” Scripta Materiala 67, 720-723, 2012.
  145. Braun, P.V., J. Cho, J.H. Pikul, W.P. King, and H. Zhang, “High Power Rechargeable Batteries,” Current Opinion in Solid State & Materials Science 16, 186–198, 2012.
  146. Jackson, R., P.C. Fletcher, K. Jambunathan, A.R. Damodaran, J.N. Emmerich, H. Teng, W.P. King, L.W. Martin, and Y. Wu, “Note: Electrical and Thermal Characterization of a Ferroelectric Thin Film with an Electro-Thermal Nanoprobe,” Review of Scientific Instruments 83, 076105, 2012.
  147. Lee, B., and W.P. King, “2-w and 3-w Temperature Measurement of a Heated Microcantilever,” Review of Scientific Instruments 83, 074902, 2012.
  148. Greiner, C., J.R. Felts, Z. Dai, W.P. King, and R.W. Carpick, “Controlling Nanoscale Friction through the Competition between Capillary Adsorption and Thermally-Activated Sliding,” ACS Nano 6, 4305-4313, 2012.
  149. Lee, J., B.J. Lee, and W.P. King, “Deflection Sensitivity Calibration of Heated Microcantilevers Using Pseudo-gratings,” IEEE Sensors Journal 12, 2666-2667, 2012.
  150. Felts, J.R., S. Somnath, R.H. Ewoldt, and W.P. King, “Nanometer-Scale Flow of Molten Polyethylene from a Heated Atomic Force Microscope Tip,” Nanotechnology 23, 215301, 2012.
  151. Kwon, B., M.V. Schulmerich, L.J. Elgass, R. Kong, S.E. Holton, R. Bhargava, and W.P. King, “Infrared Microspectroscopy Combined with Conventional Atomic Force Microscopy,” Ultramicroscopy 116, 56-61, 2012.
  152. Maniscalco, N.I., K.D. Ko, K.C. Toussaint, and W.P. King, “Microcantilever with Integrated Light-Emitting Schottky-Barrier Avalanche-Breakdown Diodes,” Micro and Nano Letters 7, 314–316, 2012.
  153. Hu, H., J. Yeom, G. Mensing, Y. Chen, M.A. Shannon, and W.P. King, “Nano-Fabrication with a Flexible Array of Nano-Apertures,” Nanotechnology 23, 175303, 2012.
  154. Kwon, B., M. Rosenberger, R. Bhargava, D.G. Cahill, and W.P. King, “Dynamic Thermomechanical Response of Bimaterial Microcantilevers to Periodic Heating by Infrared Radiation,” Review of Scientific Instruments 83, 015003, 2012.
  155. Lee, W.K., M. Yang, A.R. Laracuente, W.P. King, L.J. Whitman, and P.E. Sheehan, “Direct-Write Polymer Nanolithography in Ultra-High Vacuum,” Journal of Nanotechnology 3, 22-26, 2012.
  156. Lee, B. C.B. Prater, and W.P. King, “Magnetic Actuation of a Heated Atomic Force Microscope Cantilever using Lorentz Force,” Nanotechnology 23, 055709, 2012.
  157. Fletcher, P.C., B. Lee, and W.P. King, “Thermoelectric Voltage at a Nanometer-Scale Heated Tip Point Contact,” Nanotechnology 23, 035401, 2012.
  158. Arpin, K.A., J.H. Pikul, W.P. King, H. Fanc, and P.V. Braun, “Template Directed Assembly of Dynamic Micellar Nanoparticles,” Soft Matter 7, 10252-10257, 2011.
  159. Lee, W.K., J.T. Robinson, D. Gunlycke, R.R. Stine, C.R. Tamanaha, W.P. King, and P.E. Sheehan, “Chemically Isolated Graphene Nanoribbons Reversibly Formed in Fluorographene Using Polymer Nanowire Masks,” Nano Letters 11, 5461-5464, 2011.
  160. Corbin, E.A., and W.P. King, “Electrical Noise Characteristics of a Doped Silicon Microcantilever Heater-Thermometer,” Applied Physics Letters 99, 263107, 2011.
  161. Chung, S., J.R. Felts, W. Wang, W.P. King, and J.J. Deyoreo, “Temperature-Dependence of Ink Transport during Thermal Dip-Pen Nanolithography,” Applied Physics Letters 99, 193101, 2011. Cover article.
  162. Somnath, S., E.A. Corbin, and W.P. King, “Improved Nanotopography Sensing via Temperature Control of a Heated Atomic Force Microscope Cantilever,” IEEE Sensors Journal 11, 2664-2670, 2011.
  163. Bhatia, B., J. Karthik, D.G. Cahill, L.W. Martin, and W.P. King, “High-Temperature Piezoresponse Force Microscopy,” Applied Physics Letters 99, 173103, 2011.
  164. Kim, S., Y. Bastani, H. Lu, W.P. King, S.R. Marder, K.H. Sandhage, A. Gruverman, E. Riedo, and N. Bassiri-Gharb, “Direct Fabrication of Arbitrary-Shaped Ferroelectric Nanostructures on Plastic, Glass and Silicon Substrates,” Advanced Materials 23, 3786, 2011.
  165. Pikul, J.H., P. Graf, S. Mishra, K. Barton, Y.-K. Kim, J.A. Rogers, A. Alleyne, P.M. Ferreira, and W.P. King, “Electrohydrodynamic Printing of Polymer onto Microcantilever Sensors,” IEEE Sensors Journal 11, 2246-2253, 2011.
  166. Fletcher, P.C., B.S. Bhatia, Y. Wu, M.A. Shannon, and W.P. King, “Electro-Thermal Atomic Force Microscope Cantilever with Integrated Heater and NPN Back-To-Back Diodes,” Journal of Microelectromechanical Systems 20, 644-653, 2011.
  167. Maniscalco, N.I. and W.P. King, “Microcantilever with Integrated Solid-State Heater, Conductive Tip, and Schottky Diode,” Sensors and Actuators A 168, 351–357, 2011.
  168. Doll, J.C., E.A. Corbin, W.P. King, and B. Pruitt, “Self Heating in Piezoresistive Cantilevers,” Applied Physics Letters 98, 223103, 2011.
  169. Grosse, K.L., M.H. Bae, F. Lian, E. Pop, and W.P. King, “Nanoscale Joule heating, Peltier Cooling and Current Crowding in Graphene-Metal Contacts,” Nature Nanotechnology 6, 287-290, 2011.
  170. Radadia, A.D., C.J. Stavis, R. Carr, H. Zheng, W.P. King, J.A. Carlisle, A. Aksimentiev, R.J. Hamers, and R. Bashir, “Control of Nanoscale Environment to Improve Stability of Immobilized Proteins on Diamond Surfaces,” Advanced Functional Materials 21, 1040-1050, 2011. Cover article.
  171. Stavis, C., T.L. Clare, J.E. Butler, A.D. Radadia, R. Carre, H. Zeng, W.P. King, J.A. Carlisle, A. Aksimentiev, R. Bashir, and R.J. Hamers, “Surface Functionalization of Thin-Film Diamond for Highly Stable and Selective Biological Interfaces,” Proceedings of the National Academy of Sciences 108, 983–988, 2011.
  172. Kwon, B., C. Wang, K. Park, R. Bhargava, and W.P. King, “Thermomechanical Sensitivity of Microcantilevers in the Mid-infrared Spectral Region,” Nanoscale and Microscale Thermophysical Engineering 15, 16-28, 2011. Cover article.
  173. Nikiforov, M.P., S. Hohlbauch, W.P. King, K. Voïtchovsky, S.A. Contera, S. Jesse, S.V. Kalinin, and R. Proksch, “Temperature-Dependent Phase Transitions of a Complex Biological Membrane in Zepto-Liter Volumes,” Nanotechnology 22, 055709, 2011.
  174. Greiner, C., J.R. Felts, Z. Dai, W.P. King, and R.W. Carpick, “Local Nanoscale Heating Modulates Single-Asperity Friction,” Nano Letters 10, 4640-4645, 2010.
  175. Privorotskaya, N.L., H. Zheng, J.A. Carlisle, R. Bashir, and W.P. King, “Piezoresistive Microcantilevers from Ultrananocrystalline Diamond,” Journal of Microelectromechanical Systems 19, 1234-1242, 2010.
  176. Privorotskya, N.L, C.J. Choi, B.T. Cunningham, and W.P. King, “Sensing Micrometer-Scale Deformations via Stretching of a Photonic Crystal,” Sensors and Actuators A 161, 66-71, 2010.
  177. Fletcher, P.C., J.R. Felts, Z. Dai, T.B. Jacobs, H. Zeng, W.K. Lee, P.E. Sheehan, J.A. Carlisle, R.W. Carpick, and W.P. King, “Wear Resistant Diamond Nanoprobe Tips with Integrated Silicon Heater for Tip-Based Nanomanufacturing,” ACS Nano 4, 3338-3344, 2010.
  178. Poellmann, M.J., P. Harrell, W.P. King, and A.J. Wagoner-Johnson, “Geometric Microenvironment Directs Cell Morphology on Topographically Patterned Hydrogel Substrates,” Acta Biomateriala 6, 3514-3523, 2010.
  179. Wei, Z., D. Wang, S. Kim, S.-Y. Kim, Y. Hu, M.K. Yakes, A.R. Laracuente, Z. Dai, S.R. Marder, C. Berger, W.P. King, W.A. deHeer, P.E. Sheehan, and E. Riedo, “Nanoscale Tunable Reduction of Graphene Oxide for Graphene Electronics,” Science 328, 1373-1376, 2010. Chemical and Engineering News of the Week June 14, 2010. Featured as a Research Highlight in Nature Chemistry July 2010.
  180. Cannon, A. H. and W. P. King, “Visualizing Contact Line Phenomena on Microstructured Superhydrophobic Surfaces,” Journal of Vacuum Science and Technology B 28, L21-24, 2010.
  181. Kjoller, K., J.R. Felts, D. Cook, C.B. Prater, and W.P. King, “High-Sensitivity Nanometer-Scale Infrared Spectroscopy using a Contact Mode Microcantilever with Internal Resonator Paddle,” Nanotechnology 21, 185705, 2010.
  182. Privorotskya, N.L., Y.S. Liu, J. Lee, H. Zeng, J.A. Carlisle, A. Radadia, L. Millet, R. Bashir, and W.P. King, “Rapid Thermal Lysis of Cells using Silicon-Diamond Microcantilever Heaters,” Lab on a Chip 10, 1135-1141, 2010.
  183. Steele, A., I. Bayer, S. Moran, A.H. Cannon, W.P. King, and E. Loth, “Conformal ZnO Nanocomposite Coatings on Micro-Patterned Surfaces for Superhydrophobicity,” Thin Solid Films 518, 5426-5431, 2010.
  184. Laracuente, A. R., M. Yang, W. K. Lee, L. Senapati, J. W. Baldwin, P. E. Sheehan, W. P. King, S.C. Erwin, and L. J. Whitman, “Reversible Electron-Induced Conductance in Polymer Nanostructures,” Journal of Applied Physics 107, 103723, 2010.
  185. Greve, A., J. Olsen, N.L. Privorotskaya, L. Senesac, T. Thundat, W.P. King, and A. Boisen, “Micro-Calorimetric Sensor for Vapor Phase Explosive Detection with Optimized Heat Profile,” Microelectronic Engineering 87, 5-8, 696-698, 2010.
  186. Kasper, M.J., V.K. Natrajan, N.L. Privorotskaya, K.T. Christensen, and W.P. King, “Natural Advection from a Microcantilever Heat Source,” Applied Physics Letters 96, 063113, 2010.
  187. Lee, W. K., Z. Dai, W. P. King, and P. E. Sheehan, “Maskless Nanoscale Writing of Nanoparticle-Polymer Composites and Nanoparticle Assemblies using Thermal Nanoprobes,” Nano Letters 10, 129-133, 2010
  188. Cannon, A. H., and W. P. King, “Microstructured Metal Molding Tools Fabricated via Investment Casting,” Journal of Micromechanics and Microengineering 20, 025025, 2010.
  189. Cannon, A. H. and W. P. King, “Hydrophobicity of Curved Microstructured Surfaces,” Journal of Micromechanics and Microengineering 20, 025018, 2010.
  190. Dai, Z. T., E. A. Corbin, and W. P. King, “Microcantilever Heater-Thermometer with Thermal Isolation Layer for Making Thermal Nanotopography Measurements,” Nanotechnology, 21, 055503, 2010.
  191. Wang, D., S. Kim, W. D. Underwood, A. J. Giordano, Z. Dai, W. P. King, S. R. Marder, and E. Riedo, “Direct Writing and Characterization of Poly(p-phenylene vinylene) Nanostructures,” Applied Physics Letters, 95, 233108, 2009.
  192. Wang, D., V. Kodali, W. D. Underwood, J. E. Jarvholm, T. Odaka, S. C. Jones, M. Rumi, Z. Dai, W. P. King, S. R. Marder, J. E. Curtis, and E. Riedo, “Thermochemical Nanolithography for Direct Assembling of Nano-Objects,” Advanced Functional Materials, 19, 3696-3702, 2009. Cover Article.
  193. Felts, J.R. and W. P. King, “Mechanical Design for Tailoring the Resonance Harmonics of an Atomic Force Microscope Cantilever during Tip-Surface Contact,” Journal of Micromechanics and Microengineering, 19, 115008, 2009.
  194. Gnecco, E., E. Riedo, W.P. King, S.R. Marder, and R. Szoszkiewicz, “Linear Ripples and Traveling Circular Ripples Produced on Polymers by Thermal AFM Probes,” Physical Review B, 79, 235421, 2009.
  195. Cannon, A. H. and W. P. King, “Casting Metal Microstructures from a Flexible and Reusable Mold,” Journal of Micromechanics and Microengineering, 19, 095016, 2009.
  196. Corbin, E. C., K. Park, and W. P. King, “Room-Temperature Temperature Sensitivity and Resolution of Doped-Silicon Microcantilevers”, Applied Physics Letters, 94, 243503, 2009. Republished online in the Virtual Journal of Nanoscience & Nanotechnology, June 29, 2009.
  197. Privorotskaya, N. L. and W. P. King, ‘Silicon Microcantilever Hotplates with High Temperature Uniformity,” Sensors and Actuators A, 152, 160-167, 2009.
  198. Lee, J., A. Liao, E. Pop, and W. P. King, “Electrical and Thermal Coupling to a Single-wall Carbon Nanotube Device using an Electro-thermal Nanoprobe,” Nano Letters, 0:4, 1356-1361, 2009.
  199. Demko, M. T.,  Z. Dai, H. Yan, W. P. King, M. Cakmak, and A. R. Abramson, “Application of the Thermal Flash Technique for Low Thermal Diffusivity Micro/Nanofibers,” Review of Scientific Instruments, 80, 036103, 2009.
  200. Charest, J. L., J. M. Jennings, W. P. King, A. P. Kowalczyk, and A. J. Garcia, “Cadherin-mediated Cell-Cell Contact Regulates Keratinocyte Differentiation,” Journal of Investigative Dermatology, 129, 564-572, 2009.
  201. Kim, K. J. and W. P. King, “Thermal Conduction between a Heated Microcantilever and Surrounding Air Environment,” Applied Thermal Engineering, 29, 1631-1641, 2009.
  202. Dai, Z. T., W. P. King, and K. Park, “100 nm Scale Resistive Heater-Thermometer on a Silicon Cantilever,” Nanotechnology, 20, 095301, 2009. Cover Article.
  203. Nafday, O. A., B. L. Weeks, W. P. King, J. Lee, “Inducing Nanoscale Morphology Changes of Pentaerythritol Tetranitrate Using a Heated Atomic Force Microscope Cantilever,” Journal of Energetic Materials, 27, 1-16, 2009.
  204. Privorotskaya, N. and W. P. King, “The Mechanics of Polymer Swelling on Microcantilever Sensors,” Microsystem Technologies Journal, 15, 333-340, 2009.
  205. Lee, J., C. M. Spadaccini, E. V. Mukerjee, and W. P. King, “Differential Scanning Calorimeter based Suspended Membrane Single Crystal Silicon Micro Hotplate,” Journal of Microelectromechanical Systems, 17:6, 1513-1525, 2008.
  206. Lee, J. and W. P. King, “Liquid Operation of Silicon Microcantilever Heaters,” IEEE Sensors Journal, 8:11, 1805-1806, November 2008.
  207. Rowland, H. D., W. P. King, J. B. Pethica, and G. L. W. Cross, “Molecular Confinement Accelerates Deformation of Entangled Polymers During Squeeze Flow,” Science, 322, 720-724, October 2008. Profiled as a news item: “Putting the Squeeze on Polymers,” Nano Today, 4, 3, 2009.
  208. Loui, A., F. T. Goericke, T. V. Ratto, J. Lee, B. R. Hart, and W. P. King, “The Effect of Piezoresistive Microcantilever Geometry and Cantilever Sensitivity during Surface Stress Chemical Sensing,” Sensors and Actuators A, 147, 516-521, 2008.
  209. Eliason, M. T., E. O. Sunden, A. H. Cannon, S. Graham, A. J. Garcia, and W. P. King, “Polymer Cell Culture Substrates with Micropatterned Carbon Nanotubes,” Journal of Biomedical Materials Research A, 86A:4, 996-1001, 2008.
  210. Gurrum, S. P., Y. K. Joshi, W. P. King, K. Ramakrishna, and M. Gall, “A Compact Approach to On-Chip Interconnect Heat Conduction Modeling Using the Finite Element Method,” ASME Journal of Electronic Packaging, 130, 031001, 2008.
  211. Lee, W.-Y., L. J. Whitman, J. Lee, W. P. King, and P. E. Sheehan, “The Nanopatterning of Stimulus-Responsive Polymer by Thermal Dip Pen Nanolithography,” Soft Matter, 4, 1844-1847, 2008.
  212. Park, K., Z. M. Zhang, and W. P. King, “Experimental Investigation on the Heat Transfer Between a Heated Microcantilever and a Substrate,” Journal of Heat Transfer, 130, 102401-1-102401-9, October 2008.
  213. Lee, J, F. H. Hunter, A. Glezer, and W. P. King, “Phase Change and Cooling Characteristics of Microjets Measured using Microcantilever Heaters,” Sensors and Actuators A, 147, 64-69, 2008.
  214. Goericke, F. T. and W. P. King, “Modeling Piezoresistive Cantilever Response to Surface Stress,” IEEE Sensors, 8:8, 1404-1410, 2008
  215. Lee, J., F. T. Goericke, and W. P. King, “Temperature Dependant Thermomechanical Noise Spectra of Doped Silicon Microcantilevers,” Sensors and Actuators A, 145-146, 37-43, 2008.
  216. Whelan, A., Y. Joshi, and W. P. King, “Improved Compact Thermal Model for Studying 3-D Interconnect Structures with Low-K Dielectrics,” Microelectronics Journal, 38, 1016-1022, 2008.
  217. Gurrum, S., W. P. King, and Y. K. Joshi, “A Semi-Analytical Solution for the 3w Method Including the Effect of Heater Thermal Conduction,” Journal of Applied Physics, 103, 113517, 2008.
  218. Gurrum, S., W. P. King, and Y. K. Joshi, “Size Effect on the Thermal Conductivity of Thin Metallic Films Investigated by Scanning Joule Expansion Microscopy (SJEM),”  Journal of Heat Transfer, 130, 082403, 2008.
  219. Lee, J. and W. P. King, “Microthermogravimetry using a Microcantilever Hotplate with Integrated Temperature Compensated Piezoresistive Strain Sensors,” Review of Scientific Instruments, 79, 054901, 2008.  Republished online in the Virtual Journal of Nanoscience and Nanotechnology.
  220. Hua, Y., W. P. King, and C. L. Henderson, “Nanopatterning Materials Using Area Selective Atomic Layer Deposition in Conjunction with Thermochemical Surface Modification via Heated AFM Cantilever Probe Lithography,” Microelectronic Engineering, 85, 934-936, 2008.
  221. Park, K., R. Bhargava, and W. P. King, “Routine Femtogram-Level Chemical Analysis using Vibrational Spectroscopy and Self-Cleaning Scanning Probe Microscopy Tips,” Analytical Chemistry, 80, 3221-3228, 2008.
  222. Rowland, H. D., G. L. W. Cross, B. S. O’Connell, J. B. Pethica, and W. P. King, “Measuring Glassy and Viscoelastic Polymer Flow in Molecular-Scale Gaps using a Flat Punch Mechanical Probe,” ACS Nano, 2:3, 419-428, 2008.
  223. Lee, J., and W. P. King, “Improved All-Silicon Microcantilever Heaters with Integrated Piezoresistive Sensing,” Journal of Microelectromechanical Systems, 17:2, April 2008.
  224. Nelson, B. A. and W. P. King, “Modeling and Simulation of the Interface Temperature Between a Heated Silicon Tip and a Substrate,” Nanoscale and Microscale Thermophysical Engineering, 12:1, 98-115, 2008.
  225. Goericke, F. T., J. Lee, and W. P. King, “Microcantilever Hotplates with Temperature-compensated Piezoresistive Strain Sensors,” Sensors and Actuators A, 143, 181-190, 2008.
  226. Yang, F.,  E. Wornyo, K. Gall, and W. P. King, “Thermomechanical Formation and Recovery of Nanoindents in a Shape Memory Polymer Studied using a Heated Tip,” Scanning, 30, 197-202, 2008.
  227. Park, K., S. Basu, W. P. King, and Z. M. Zhang, “Performance Analysis of Near-Field Thermophotovoltaic Devices Considering Absorption Distribution,” Journal of Quantitative Spectroscopy and Radiative Transfer, 109, 305-316, 2008.
  228. Lee, J. and W. P. King, “Microcantilever Actuation via Periodic Internal Heating,” Review of Scientific Instruments, 78, 126102, 2007.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology.  One of the 20 most downloaded articles from Review of Scientific Instruments during December 2007.
  229. Wang, D., R. Szoszkiewicz, M. Lucas, E. Riedo, T. Okada, S. C. Jones, S. R. Marder, J. Lee, and W. P. King, “Local Wettability Modification by Thermochemical Nanolithography with Read-Write-Overwrite Capability,” Applied Physics Letters 91, 243104, 2007.
  230. Aeschimann, L., F. Goericke, J. Polesel-Maris, A. Meister, T. Akiyama, B. Chui, U. Staufer, R. Pugin, H. Heinzelmann, N. F. de Rooij, W.P. King, and P. Vettiger, “Piezoresistive Scanning Probe Arrays for Operation in Liquids,” Journal of Physics: Conference Series, 61, 6-10, 2007.
  231. Remmert, J. L., Y. Wu, M. A. Shannon, and W. P. King, “Contact Potential Measurement using a Heated Atomic Force Microscope Cantilever Tip,” Applied Physics Letters, 91, 143111, 2007.
  232. Harding, L., W. P. King, X. Dai, D. Q. M. Craig, and M. Reading, “Nanoscale Characterization and Imaging of Partially Amorphous Materials using Local Thermomechanical Analysis and Heated Tip AFM,” Pharmaceuticals Research 24, 2048-2054 , 2007.
  233. Rowland, H. D., A. C. Sun, P. R. Schunk, G. L. W. Cross, and W. P. King “Predicting Polymer Flow during High-Temperature Atomic Force Microscope Nanoindentation,” Macromolecules, 40, 8096-8103, 2007.
  234. Cross, G. L. W., B. S. O’Connell, J. B. Pethica, H. D. Rowland, and W. P. King, “Variable Temperature Thin Film Indentation with a Flat Punch,” Review of Scientific Instruments, 79, 013904, 2007.
  235. Nelson, B. A., and W. P. King, “Temperature Calibration of Heated Silicon Atomic Force Microscope Cantilevers,” Sensors and Actuators A, 140, 51-59, 2007.
  236. Yang, F., E. Wornyo, K. Gall, and W. P. King, “Nanoscale Indent Formation in Shape Memory Polymers using a Heated Probe Tip,” Nanotechnology, 18, 285302, 2007.
  237. Eliason, M. T., J. L. Charest, B. A. Simmons, A. J. García, and W. P. King, “Nanoimprint Fabrication of Polymer Cell Substrates with Combined Microscale and Nanoscale Topography,” Journal of Vacuum Science and Technology B, 24, L31-L34, 2007.  Republished online in the Virtual Journal of Biological Physics Research.
  238. Wornyo, E., K. Gall, F. Yang, and W. P. King, “Nanoindentation of Shape Memory Polymer Networks,” Polymer, 48, 3213-3225, 2007.
  239. Park, K., A. Marchenkov, Z. M. Zhang, and W. P. King, “Low Temperature Characterization of Heated Microcantilevers,” Journal of Applied Physics, 101,  094504, 2007.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  240. Chui, B. W., L. Aeschimann, T. Akiyama, U. Staufer, N.F. DeRooij, J. Lee, F. Goericke, W. P. King, and P. Vettiger, “Advanced Temperature Compensation for Piezoresistive Sensors based on Crystallographic Orientation,” Review of Scientific Instruments, 78, 043706, 2007.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  241. Szoszkiewicz, R., T. Okada, S. C. Jones, T.-D. Li, W. P. King, S. R. Marder, and E. Riedo, “High-Speed, Sub-15 nm Feature Size Thermochemical Nanolithography,” Nano Letters, 7, 1064-1069, 2007.
  242. Park, K., J. Lee, Z. M. Zhang, and W. P. King, “Topography Imaging with a Heated Atomic Force Microscope Cantilever in Tapping Mode,” Review of Scientific Instruments, 78, 043709, 2007.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  243. Charest, J., A. Garcia, and W. P. King, “Myoblast Alignment and Differentiation on Cell Culture Substrates having Microscale Topography and Model Chemistries,” Biomaterials, 28, 2202-2210, 2007.
  244. Nelson, B. A. and W. P. King, “Measuring Material Softening with Nanoscale Spatial Resolution using Heated Silicon Probes,” Review of Scientific Instruments, 78, 023702, 2007.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  245. Hua, Y., S. Saxena, C. L. Henderson, and W. P King, “Nanoscale Thermal Lithography by Local Polymer Decomposition Using a Heated Atomic Force Microscope Cantilever Tip” Journal of Micro-Nanolithography, MEMS, and MOEMS, 6, 023012, 2007.
  246. Park, K., J. Lee, Z. M. Zhang, and W. P. King, “Frequency-Dependant Electrical and Thermal Response of Heated Atomic Force Microscope Cantilevers,” Journal of Microelectromechanical Systems, 16, 213-222, 2007.
  247. King, W. P. and K. E. Goodson, “Thermomechanical Formation of Nanoscale Polymer Indents with a Heated Silicon Tip,” Journal of Heat Transfer, 129, 1600-1604, 2007.
  248. Lee, J. and W. P. King, “Microcantilever Hotplates: Design, Fabrication, and Characterization” Sensors and Actuators A, 136, 291-298, 2007.
  249. Kim, K. J., K. Park, J. Lee, Z. M. Zhang, and W. P. King, “Nanotopographical Imaging using a Heated Atomic Force Microscope Cantilever Probe,” Sensors and Actuators A, 136, 95-103, 2007.
  250. Lee, J., K. Naeli, H. Hunter, J. Berg, T. Wright, C. Courcimault, N. Naik, M. Allen, O. Brand, A. Glezer, and W. P. King, “Characterization of Liquid and Gaseous Micro-and Nanojets using Microcantilever Sensors,” Sensors and Actuators A-Physical, 134, 128-139, 2007.
  251. Naik, N., C. Courcimault, J. Berg, H. Hunter, J. Lee, K. Naeli, T. Wright, M. G. Allen, O. Brand, A. Glezer and W. P. King,  “Microfluidics for Generation and Characterization of Liquid and Gaseous Micro- and Nanojets,” Sensors and Actuators A, 134, 119-127, 2007.
  252. Abel, M. R., T. L. Wright, S. Graham, and W. P. King, “Thermal Metrology of Silicon Microstructures using Raman Microscopy,” IEEE Transactions on Components and Packaging Technology, 30, 200-208, 2007.
  253. Gallant, N. D., J. L. Charest, W. P. King, and A. J. García, “Micro- and Nano-Patterned Substrates to Manipulate Cell Adhesion,” Journal of Nanoscience and Nanotechnology,  7:3, 803-807, 2007.
  254. Lee, J., T. L. Wright, M. R. Abel, E. O. Sunden, A. Marchenkov, S. Graham, and W. P. King, “Thermal Conduction from Microcantilever Heaters in Partial Vacuum,” Journal of Applied Physics, 101, 014906, 2007. Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  255. Marder, S. R, T. Okada, S. C. Jones, E. Riedo, R. Szoszkiewicz, W. P. King, J. Wang, S. Barlow, J.W. Perry, V. Chen, M. Rumi, J. M. Hales, W. Dong, and W. Haske, “Materials for Fabrication of Nanoscale Structures,” Polymer Preprints, 27, 1018-1019, 2006.
  256. Lee, J., T. L. Wright, T. Beecham, B. A. Nelson, S. Graham, W. P. King, “Electrical, Thermal, and Mechanical Characterization of Silicon Microcantilever Heaters,” Journal of Microelectromechanical Systems, 15, 1644-1655, 2006.
  257. Allen, A., A. Cannon, J. Lee, W. P. King, and S. Graham, “Flexible Microdevices based on Carbon Nanotubes,” Journal of Micromechanics and Microengineering, 16, 2722-2729, 2006.
  258. Cannon, A. H., A. C. Allen, S. Graham, and W. P. King, “Molding Ceramic Microstructures on Flat and Curved Surfaces with and without Embedded Carbon Nanotubes,” Journal of Micromechanics and Microengineering, 16, 2554-2563, 2006.
  259. Bakbak, S., P. K. Leech, B. E. Carson, S. Saxena, W. P. King, and U. H. F. Bunz, “1,3-Dipolar Cycloaddition for the Generation of Nanostructured Semiconductors by Heated Probe Tips,” Macromolecules, 39, 6793-6795, 2006.
  260. King, W. P., S. Saxena, B. A. Nelson, and B. Weeks, “Nanoscale Thermal Analysis of an Energetic Material,” Nano Letters, 6, 2145-2149, 2006.
  261. Sunden, E. O., J. K. Moon, C. P. Wong, W. P. King, and S. A. Graham, “Microwave Assisted Patterning of Vertically Aligned Carbon Nanotubes onto Polymer Substrates,” Journal of Vacuum Science and Technology B, 24, 1947-1950, 2006.
  262. Yang, M., P. E. Sheehan, W. P. King, and L. J. Whitman, “Direct Writing of a Conducting Polymer with Molecular Control of Physical Dimensions and Orientation,” Journal of the American Chemical Society, 128, 6774-6775, 2006.
  263. Allen, A., E. O. Sunden, A. Cannon, S. Graham, and W. P. King, “Nanomaterial Transfer using Hot Embossing for Flexible Electronic Devices,” Applied Physics Letters, 88, 083112, 2006. Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  264. Sunden, E. O., J. Lee, T. L. Wright, W. P. King, and S. Graham, “Room Temperature Chemical Vapor Deposition and Mass Detection on a Heated Atomic Force Microscope Cantilever,” Applied Physics Letters, 88, 033107, 2006. Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  265. Nelson, B. A., W. P. King, A. R. Laracuente, P. A. Sheehan, and L. J. Whitman, “Direct Nanoscale Deposition of Continuous Metal Nanostructures using Thermal Dip Pen Nanolithography,” Applied Physics Letters, 88, 033104, 2006. Republished online in the Virtual Journal of Nanoscience & Nanotechnology.
  266. Charest, J. L., M. T. Eliason, A. J. Garcia, and W. P. King, “Combined Microscale Mechanical Topography and Chemical Patterns on Polymer Substrates for Cell Culture,” Biomaterials, 27, 2487-2494, 2006.
  267. Charest, J. L., M. T. Eliason, A. J. Garcia, W. P. King, A. A. Talin, and B. A. Simmons, “Polymer Cell Culture Substrates with Combined Nanotopographical Patterns and Micropatterned Chemical Domains,” Journal of Vacuum Science and Technology B, 23, 3011-3014, 2005. Republished online in the Virtual Journal of Nanoscience & Nanotechnology 12: 25, 2005.  Also republished online in the Virtual Journal of Biological Physics Research 10: 12, 2005.
  268. Rowland, H. D., W. P. King, A. C. Sun, and P. R. Schunk, “Simulations of Non-Uniform Embossing: The Effect of Asymmetric Neighbor Cavities on Polymer Flow during Nanoimprint Lithography,” Journal of Vacuum Science and Technology B, 23, 2958-2962, 2005.
  269. King, W. P., “Design Analysis of Heated Atomic Force Microscope Cantilevers for Nanotopography Measurements,” Journal of Micromechanics and Microengineering, 15, 2441-2448, 2005.
  270. Rowland, H. D., A. C. Sun, P. R. Schunk, and W. P. King, “Impact of Polymer Film Thickness and Cavity Size on Polymer Flow during Nanoimprint Lithography,” Journal of Micromechanics and Microengineering, 15, 2414-2425, 2005.
  271. Cannon, A., Y. Hua, C. Henderson, and W. P. King, “Self-assembly for Three-Dimensional Integration of Functional Electrical Components,” Journal of Micromechanics and Microengineering, 15, 2172-2178, 2005.
  272. Masters, N., W. Ye, and W. P. King, “The Impact of Sub-Continuum Gas Conduction on the Sensitivity of Heated Atomic Force Microscope Cantilevers,” Physics of Fluids, 17, 100615, 2005. Republished online in the Virtual Journal of Nanoscience & Nanotechnology 12: 16, 2005.
  273. Gurrum, S. J., Y. K. Joshi, W. P. King, and K. Ramakrishna, “Scanning Joule Expansion Microscopy of a Constriction in a Thin Metallic Film,” Journal of Heat Transfer, 127, 809, 2005.
  274. Nelson, B. A., W. P. King, and K. Gall, “Shape Recovery of Nanoscale Imprints in a Thermoset “Shape Memory” Polymer,” Applied Physics Letters, 86, 103108-103110, 2005. Republished online in the Virtual Journal of Nanoscience & Nanotechnology 11: 10, 2005.
  275. Gurrum, S., Y. Joshi, W. P. King, and K. Ramakrishna, “Numerical Simulation of Electron Transport through Constriction in a Metallic Thin Film,“ Electron Device Letters, 25, 696-698, 2004.
  276. Charest, J. L., L. E. Bryant, A. Garcia, and W. P. King, “Hot Embossing for Micro Patterned Cell Substrates,” Biomaterials, 25, 4767-4775, 2004.
  277. Chen, Y. B., Q. Zhu, T. L. Wright, W. P. King, and Z. M. Zhang, “Bidirectional Reflectance Measurements of Silicon Microstructures,” International Journal of Thermophysics, 25, 1235-1252, 2004.
  278. Poggi, M. A., E. D. Gadsby, L. A. Bottomley, W. P. King, E. Oroudjev, and H. Hansma, “Scanning Probe Microscopy,” Analytical Chemistry, 76, 3432-3446, 2004.
  279. Rowland, H. D. and W. P. King, “Polymer Deformation and Filling Modes during Microembossing,” Journal of Micromechanics and Mircroengineering, 14, 1625-1632, 2004.
  280. Sheehan, P. A., L. J. Whitman, W. P. King, and B. A. Nelson, “Nanoscale Deposition of Solid Inks via Thermal Dip Pen Nanolithography,” Applied Physics Letters, 85, 1589-1591, 2004.  Republished online in the Virtual Journal of Nanoscience & Nanotechnology, 10, 2004.
  281. King, W. P., T. W. Kenny, and K. E. Goodson, “Comparison of Thermal and Piezoresistive Sensing Approaches for Atomic Force Microscopy Topography Measurements, “Applied Physics Letters, 25, 2086-2088, 2004.
  282. King, W. P., T. W. Kenny, K. E. Goodson, G. L. W. Cross, M. Despont, U. Dürig, H. Rothuizen, G. K. Binnig, and P. Vettiger, “Design of Atomic Force Microscope Cantilevers for Combined Thermomechanical Writing and Ready in Array Operation,” Journal of Microelectromechanical Systems, 11, 765-774, 2002.
  283. King, W. P. and K. E. Goodson, “Thermal Writing and Nanoimaging with a Heated Atomic Force Microscope Cantilever,” Journal of Heat Transfer, 124, 597, 2002.
  284. King, W. P., T. W. Kenny, K. E. Goodson, G. L. W. Cross, M. Despont, U. Dürig, H. Rothuizen, G. Binnig, and P. Vettiger, “Atomic Force Microscope Cantilevers for Combined Thermomechanical Data Writing and Reading,” Applied Physics Letters, 78, 1300-1302, 2001.
  285. King, U., G. L. W. Cross, M. Despont, U. Drechsler, W. Haeberle, M. I. Lutwyche, H. Rothuizen, R. Stutz, R. Widmer, P. Vettiger, G. K. Binnig, W. P. King, and K. E. Goodson, “Millipede- An AFM Data Storage System at the Frontier of Nanotribology,” Tribology Letters, 25-32, 2000.